1.5mm Stainless steel base with powder coating CNC 6061 aluminum one-inch ball with black anodizedTools Needed: Interior Trim Pry Tool T25 Torx Masking TapeRequire: 17mm ball phone mount (After market) or 17mm connecting arm (After market)
Remove the passenger side center console panel. It is recommended to tape off the carbon fiber/aluminum trim piece on top when prying the side panel off. (Photo 1)
The clips of the side panel will be pried away from the center console (Photo 2)
Remove the two bolts holding the side of the PCM. (Photo 3)
Install the metal bracket using the factory bolts. (Photo 4)
Push the trim until it is flush towards the PCM before pushing in the clips on the side.Use a Garmin connecting adaptor to hold your Garmin Catalyst.Instruction Manual Link
